在线留言
返回列表
| 一种用于将支导线连接到干导线上的T型线夹，包括：T型基体，其横部开干线槽，其纵部开支线孔，干线槽内壁和支线孔内壁均设置金属衬，且两金属衬连成一体，基体纵部的上表面螺接支导线压紧螺钉；干线槽封盖，其与干线槽插接，其上表面螺接干导线压紧螺钉；T型上盖，其与T型基体扣合。连接时只需进行紧固螺钉的简单工作，操作省时省力；支导线与干导线通过压紧螺钉与金属衬紧密接触，且接触面积大，连接安全可靠，是施工人员的首选产品。 For a wire connected to the dry type T wire on the clip, including: T matrix, the cross section of the trunk opening groove, the longitudinal part of expenditure line hole, trunk and branch line groove of the inner wall of hole wall are arranged metal lining, and the two metal lining into one matrix on the surface of the longitudinal screw connection the wire pressing screw groove; the trunk cover, and inserting the trunk, on the surface of the stud wire pressing screw joint stem; T type cover, and the T type matrix buckle. When connecting, it is only necessary to carry out the simple work of fastening screws, save time and effort in operation, and support wires and dry conductors are closely contacted with the metal liners through the compression screw and the contact area is large, and the connection is safe and reliable, which is the preferred product for construction personnel. |
| 实现电缆不切断时的干线分线，组态灵活
所有电性能指标均符合IEC国际标准，具导电性好、电阻损耗低、电压降小等优点 接触点压降仅为1.98mV, 是国际标准的2/3 较强耐热性和抗冲击能力，可承受120A/mm2 的短路强度试验 绝缘基座采用阻燃级工程塑料制作，耐老化性能优良 安装方便，节省施工工时，不用线鼻子（端头），实瑞裸导体连接，深受施工队欢迎 与插接式母线槽及分支电缆相比，节省50%-70%的工程费用 |
| 型号Specification | T型线夹-240/95 |
| 主线截面Main line | 120-240mm2 |
| 支线截面Branch line | 50-95mm2 |
| 压线螺丝Screw | M6 |
| 力矩Torque | 18N·m |
| 剥线长度Strip length | 44mm |
| 外观尺寸Dimension | 长65宽75高60mm |
 |
打开上盖，取出带电体 Open the upper cover and remove the charged body |
 |
将主线与支线剥开适用长度 Peel off the length of the main line and the branch line |
 |
按图示接好主线支线，并拧紧螺丝 Connect the main line with the diagram and tighten the screw |
 |
盖上上盖，完成安装 Cover the upper cover to complete the installation |
 |
外壳采用全新ABS材质，搭配纯铜导体及金属压块 |
 |
大电流接触稳定，绝缘外壳安全性高 |
 |
大量用于建筑配电设施，竖井桥架内的导线分支 |
-
13567769200
-
-
-
版权所有 @ 2018 浙江宝杰电力科技有限公司a | 全国免费服务热线：13567769200