在线留言
返回列表
| XKT3系列电缆T接端子主要适用于建筑、工业电气设备及特殊场合中作主电缆（干线）不能切断时的“T”型支线连接用。该产品在继承了JXT2系列T接端子的所有优点的基础上突出了其密封性能，特殊设计的密封圈可满足各种规格截面电缆的线径匹配，其优异的防护性能大拓展了其应用范围；同时在产品外形上进行更精心、更具突破性的工业设计，使其不仅具有纤小美观的外形，同时更具有可靠紧凑的内部结构。该产品的推出提升了产品的密封性能使其不仅可应用室内，同时在进行密封灌胶处理后，更可应用在户外，电缆沟，地下空中等对防护有特殊要求的场合。 The T terminals of JTX3 series cables are mainly used in building, industrial electrical equipment and special occasions to connect the main cable (trunk line) when it can not be cut off. The "T" shaped branch connection is used. The product is based on inheriting all the advantages of JXT2 series T terminal on the sealing performance of the sealing ring, special design can meet the various specifications of cable diameter matching, its excellent protection performance and expand the application range; at the same time, more carefully, more breakthrough of product in industrial design the appearance, not only has the delicate and beautiful appearance, but also has a compact structure and reliable internal. The introduction of this product improves the sealing performance of the product, enabling it not only to be applied indoors, but also can be applied in outdoor, cable trench, underground air and other special occasions for protection. |
| 符合IEC60947-7-1，GB14048.7.1标准 实现不切断主干线时的现场分支连接 实现铜或铝导体的可靠连接，实现铜——铝过度 外形美观坚固，防护等级符合IEC 60529 IP54，经特殊密封处理防护等级可达IP68 现场接线时不用对线端作特殊处理，不用特殊工具，使用便捷，节省施工工时 线夹对导线包容型犬牙交错结构，传导截面大、接触压力大、接点压降小，辅之以高强度螺栓压接，防松抗震 |
| 型号Specification | XKT3-50(35) |
| 主线截面Main line | 10-50mm2 |
| 支线截面Branch line | 6-35mm2 |
| 压线螺丝Screw | M8 |
| 力矩Torque | 18N·m |
| 剥线长度Strip length | 23mm |
| 外观尺寸Dimension | 长45宽32高61mm |
 |
打开防护罩，并拧开螺母取出导体 Open the shield and unscrew the nut Take out the conductor |
 |
将主线与支线剥开适用长度 Peel off the length of the main line and the branch line |
 |
先后将主线、导体、支线、螺栓螺母放入支架，并拧紧螺母 Successively the main line, the conductor, the branch line, the bolt, the nut is placed in the bracket, and the nut is tightened. |
 |
盖上防护罩并拧上外壳4个螺丝
完成安装 Cover the shield and screw the 4 screws on the shell to complete installation |
 |
外壳采用全新尼龙材料， 搭配纯铜导体及金属固定螺杆 |
 |
大电流接触稳定，可以用于五芯电缆快速T接 |
 |
大量用于建筑楼盘供电分支，设计合理、质量可靠 |
-
13567769200
-
-
-
版权所有 @ 2018 浙江宝杰电力科技有限公司a | 全国免费服务热线：13567769200